OFC

2017 Optical Networking and Communication Conference & Exhibition

booth 1331. Location this year is LA Convention Center. Show dates March 21-23, 2017 Web site: ofcconference.org

 

Our business philosophy is simple and straightforward: “Work closely with our customers, produce high-quality technology, and keep costs down - every time.”

Malcolm D. Hill

President


Certified since March 2010

ISO Cert

 

 

Resistors

Many sheet resistivities are available to the designer.  The selection should be left to the factory when possible to maximize yield and reduce cost.  When sheet resistivities must be specified, the overall range and tolerance requirements must be balanced to obtain the optimum choice for processing.  Resistor tolerances of ±10% usually require trimming, although some designs can achieve ±5% without trimming.  Resistor tolerances of less than ±2% will affect manufacturing yield in volume.  For resistor tolerances ≤ 1%, please contact the factory for further design considerations to optimize yield.

1000 Hour @125°C Typical Resistor Data

Substrate
Material
Resistor
Film
TCR Range
(ppm/°C)
Sheet RHO
Ω/□ HTT
Stability
AI2O3,AIN, BeO
TaN2
-125±25
25-150
<0.5%
AI2O3, BeO
NiCr**
0-25
50-250
<0.5%
Note: All Tests are performed in forced air convection
furnaces on un-trimmed resistors.

**Proprietary Alloy



Resistor Design and Layout Criteria*

Parameter Minimum Values
± .0005"
Resistor Length
.002"
Resistor Width
.002"
Termination Length
.003"
Termination Width
.003"
Resistor masking overlay on conductor termination
.002"
Resistor inboard of conductor
.0005"
*Note: Resistor inboard of conductor
termination only




 

Resistor Trimming Styles

Style
Tolerances
Comments
Bake to Value
±10% STD,
±5% Special
Resistors must be optimized for manufacturability
1-10%
Design to Accommodate 50% width reduction
Microwave Trim(Symmetrical Scan Cut)
1-10%
Design to Accommodate 50% width reduction 10% Reduction by Request
1-10%
Compensate Resistor width to accommodate laser kerfs of .0015" for Each plunge
*Note: A test structure can be used to monitor
shorted or isolated resistors.


Helpful Formula:

TcR=

(R2-R1)

R1 (T2-T1)

x106 PPM/°C


R1 = Initial Resistance (Ω)
R2 = Final Resistance(Ω)
T1 = Initial Temperature (°C)
T2 = Final Temperature (°C)

West Coast Sales

Glen Steward

(510) 468-7341

gsteward@ditf.com

East Coast Sales

Tom Lavallee

(603) 845-3450

tpl@ditf.com

DITF - Interconnect Technology

(775) 782-1041

sales@ditf.com

2245 Meridian Blvd.
Minden , NV 89423