IMS 2018

Pennsylvania Convention Center, Philadelphia, PA

June 12-14 - Booth 1903


Certified since March 2010

ISO Cert

 

 

Basic Conductors

Patterning - All circuit designs contain critical dimensions necessary for compliance and performance.  It is important to consider these when designing the circuit to not add unnecessary cost to the design.  Conductor tolerances of <0.001" require more costly tooling to ensure compliance.
 

Basic Conductor Standard Layout Guidelines

Feature Values and Tolerances Comments
.003"
Per side 20% Minimum Taper
.005"
Per side 20% Minimum Taper
.0004 minimum ± .0001"
Minimum space widths are a function of conductor thickness
.0004 minimum ± .0001"
Minimum line widths are a function of conductor thickness
.001" minimum
.003" preferred
.007" ± .005"
.006" typical radius, length 2 x material thickness
.005" minimum +25%/-50%
increase or decrease of design area
± .003"
± .001" by request
0 - .003"
 


Multi Layer Conductor Standard Layout Guidelines

Feature Values and Tolerances Comments
.003" Diameter
Ground signal ground up to 2 levels
.002" width .004" pitch
Ground signal ground up to 2 levels
.005"

 

West Coast Sales

Glen Steward

(510) 468-7341

gsteward@ditf.com

East Coast Sales

Tom Lavallee

(603) 845-3450

tpl@ditf.com

DITF - Interconnect Technology

(775) 782-1041

sales@ditf.com

2245 Meridian Blvd.
Minden , NV 89423